REM-8 EMF Canceller

RD3 Disc Demagnetizer

RL-30III Demagnetizer

RIO-5II Negative Ion Generator

RGC-24 Grounding Conditioner

RR-77 Ultra Low-Frequency Pulse Generator

Neutralizes electromagnetic radiation from audio equipment and transformers.

Demagnetizes discs and reduces electrostatic charges by a proprietary process of generating negative ions created by Tourmaline. (117V)

Demagnetize analogue record discs, power cables, interconnects, digital cables, etc. The RL-30III has a core-less coil, so it demagnetizes uniformly. The RL-30III can also demagnetize CD's, CD-R's, DVD's, SACD's, DVD-A's, HD-DVD, and Blu-ray Disc. (117V)

The RIO-5II generates negative ions to neutralize static on CD's, CD-R's, DVD's, SACD's, DVD-A's, HD-DVD, and Blu-ray Disc. (117V)

Reduces noise induced in a component by RFI and EMI. The RGC-24 consists of three parts; the RGC, cable, and ground terminal. The RGC is positioned under or on top of a component near the transformer. The RGC can be moved around to find the best sounding location.

The RR-77 Ultra Low-Frequency Pulse Generator creates a 7.83 Hz pulse to counteract The Schumann resonance that occurs naturally. Placed anywhere in the room, sound is improved and becomes smoother and more natural. (117V)

RIQ-5010 Pure Quartz Insulator

QR-8 Pure Quartz Resonators

PSA-100 Pure Silk Absorber

Vibration Control Shorting Pins

RCI-3

Cable Insulator

RIQ-5010 is cut from a solid mass of natural quartz crystal ore. Place on top of equipment or near power supplies and cables for best performance.

Sound improves by placing QR-8 onto a components surface which causes resonance, the resonance frequency of the component changes and it stops any resonation. Attach to plug, connector, parts, equipment switch, equipment housing, door in the room, windows, wall, floor and ceiling.

Silk is the best insulator among natural fibers because it’s cellular structure is random. By using small amounts near your equipment or connectors, sound quality is improved. Silk dampens and absorbs acoustic standing waves and vibration and reduces static electricity.

The SIP-8F/BSIP-2F Vibration Control Shorting-pin can be used to short out an input RCA/XLR. This is desirable on some equipment to lower the noise floor. Some manufacturers ship them with their preamps.  Outputs should not be shorted.

RCI-3 is used under power cables, interconnects and speaker cables to elevate the cables from the floor or shelves and lower the noise floor. Special ores are used to absorb EMI and RFI.