T-60
Chassis
The chassis consists of a brushed
anodized aluminum/ black acrylic sandwich (10/20/10/10/20/6/20/10mm
thick). The benefit of this
design is in its increased damping, dissipation and anti-
vibration abilities. The aluminum plates are also slow-baked to
increase rigidity and resistance from scratching.
Suspension
The chassis is mounted to 3 height
adjustable Magnetic Suspension feet. These resonance damping feet,
which in combination with the chassis add to the elimination of
external vibrations.
Bearing
Magnetic Suspension Low Friction
Ceramic/Bronze Bearing with Stainless Steel Ball and
adjustable vertical bearing force.
Platter
The platter is precision machined on
an automated CNC lathe. The platter is then Hardcoat anodized to
increase its hardness, density, abrasion resistance and overall
dampening abilities. The finished thickness after machining and
anodizing is 128mm (5.06")
at a weight of
20kg (44 lbs).
Motor Assemblies
Dual AC synchronous motors are used which are
custom manufactured in Europe according to our requirements. The
motors are housed in their own massive stand alone aluminum cases
which negate any vibrations from flowing directly into the table.
The acrylic pulley is used for its low resonance and drives the
platter with silicon belts.
SC-30 Speed Controller with GRS System
The T-60 comes standard with the SC-30 Speed
Controller with adjustable speed GRS System (Generate Rotate,
Synchronize) which is a combination of clean regenerated power and
precise measurement of the platters revolutions. Together the
non-fluctuating power generated by the speed controller and the
optical measurement system on the platter locks the precise speed
and provides consistent rotation free from fluctuating wall power.
Arm Mounts
The table includes two arm mounts as standard. One
arm mount is designed for SME tonearms and the other for Rega
tonearms. The Rega mount can be adjusted to accommodate arms from
210mm to 230mm in length and has a Slow Pitch VTA adjustment
capability which can be easily extended up to 20-25mm by hand.
Specifications
|
Speed |
33.3rpm/45rpm GRS system, with
adjustable speed |
|
Belt |
Silicon belts, 6 each |
|
Color |
Brush aluminum reflective Black |
|
Input Power |
100-120VAC 60 Hz |
|
Dimension |
635mm x 435mm x 282mm |
|
Total Weight |
58.6 Kgs (129 lbs.) |
|
Shipping Weight |
155 lbs, in 2 boxes, 26x24x12 65 lbs and 30x24x15 90 lbs |
Accessories Included:
Assembly/installation
Notes: The platter is not shipped attached to the chassis and must
be assembled on-site. A minimum of two strong people are
recommended to assemble the very heavy platter. The turntable
should only be placed on a support table with sufficient stability
and capacity for the substantial weight and size.
