5N Pure SILVER... Outstanding Performance and Value
These cables pass digital and video signals without deterioration or
loss by utilizing 5N (99.9995%) Pure SILVER in a center conductor. The three
layer shield protects the signal from external noise, and transmits
a pure signal. FTVS-510 cable is suitable for audio and video (75Ω)
The cables are the result of advanced technology and manufacturing.
Pure Silver Conductor
(99.9995%) pure SILVER is used for the central conductor.
Manufacturing the cable alone consists of 19 separate processes.
including continuous casting, cold rolling and annealing within two
degree tolerances . The use of diamond dies insures there are no
spaces in the skin grain boundaries.
layer (around the center conductor) is charged with by static
electricity and has a bad influence on the signal. Oyaide solves
this problem by utilizing 0.2mm TEFLON as a semiconductor layer to
absorb and discharge static electricity.
polyethylene) is used. In addition to being an ultra low dielectric
insulator, it also damps vibration. The FPE insulation has optimal
electric characteristics and reduces the negative effects of
shield structure is utilized. The COPPER shield blocks low frequency RFI/EMI noise and the SILVER PLATED COPPER shield blocks high
frequency RFI/EMI noise. Together, the two shields block wide band
polyurethane jacket is resistant to ultraviolet light.
considers the connectors as an integral part of the cable system and
designs and manufactures the connectors to match the requirements of
the cable. The connector should improve electric conductivity of the
cable and contact in the plug . The DB-510 interconnect
achieves perfect pure silver transmission by utilizing the
SLSB (BNC) Pure SILVER connectors.
5N Pure SILVER Conductor
SLSB (Pure SILVER Connector BNC)
0.7m / 1.3m